SuperSonic Chopper Extra

An all-in-one kitchen tool. Our cleverly manual food processor uses an innovative system of blade and paddle attachments to make sauces, milkshakes, mayonnaise, vinaigrettes, and so much more.

Zero cooking experience required for amazing results!: The SuperSonic Chopper Extra is very simple and safe to use.

Time Saving: Amazingly fine chopping thanks to the curved blades and speed of the pull cord mechanism!!!​ Cutting food prep time, finely chop an entire onion, couple of carrots, coriander or prepare a simple sauce in just 45 seconds with only 5 pulls. 

Use it anywhere!: No electricity needed with this manual food processor–one pull activates the blades.

Convenient: This versatile chopper will be your everyday kitchen partner to create simple or gourmet meals. Thanks to it's two inserts, blades and paddle, you start with the blades chopping and end with the paddle to finish blending. And with it's smart funnel, the oil for making mayonnaise runs very slowly into the preparation while the paddle continues to mix. Its your third hand!

More of what you love: This family-sized blender allows you to make larger quantities of your favorite foods.​

The SuperSonic Chopper Extra will fit comfortably in even the smallest kitchens, thanks to its compact size: All attachments nest into the base of the Extra!

• Material
  Adaptor ring: ABS
  Anti skid ring: SEBS
  Base: TP
  Blade insert: POM, PP, STAINLESS STEEL
  Bottom cover: PBT
  Funnel: PP
  Paddle insert: POM
  Top Cover: ABS, PBT, POM, STAINLESS STEEL
  
• Metric / US Dimensions
  Full Product: W - x H With cover 19.5 x L 15.6 Ø - cm / W - x H With cover 7.7 x L 6.1 Ø - inch
  
• Metric / US Capacity Volume
  Full Product: Usable capacity 800 ml - Base full capacity 1.35 L / Usable capacity 27 oz - Base full capacity 43.9 oz
  
• Component Specific Use and Care
  Adaptor ring: Dishwasher safe
  Anti skid ring: Hand wash, Not dishwasher safe
  Base: Dishwasher safe
  Blade insert: Hand wash, Not dishwasher safe
  Bottom cover: Dishwasher safe
  Funnel: Dishwasher safe
  Paddle insert: Dishwasher safe
  Top Cover: Not dishwasher safe, Hand wash

Healthy Helper: Adding chopped herbs, onion and garlic to your recipes can reduce the amount of salt needed for seasoning. More taste, less salt!

For optimal chopping, make sure herbs have been washed and thoroughly dried.

For best results:

When chopping dry ingredients, pull cord 3-4 times and then shake the Chopper, using both hands, before continuing, so that the ingredients that have stuck to the walls come back in the center.

Cut larger ingredients into pieces 3cm/1.1inch in length to avoid blocking blades.

For medium-sized ingredients such as onions, divide into 4 pieces for medium sized onions and 8 pieces for larger ones. Same for other ingredients similar in size and shape.

Hard ingredients such as parmesan cheese and ginger should be cut into 1cm/.4 inch cubes.

Quick cleaning tip: Pour 150 ml water into the base of the Chopper Extra, add 1-2 drops liquid soap and blend for 10 sec. Disassemble the cover, quickly rinse and dry. Your product is clean in just a few seconds.

For optimal chopping results and to avoid damaging the product, here are the recommended maximum quantity per type of ingredients :

Fresh herbs​ 40g​

Kale​ ​80g​

Onion (cut in 8/4) 250g​

Carrots (2-3cm)​ 250g​

Celery (4cm)​ ​250g​

Chiles (3-4cm)​ 120g​​

Tomatoes ​ 250g​

Rhubarb (4cm)​ 250g​

Strawberries ​ 250g​

Hazelnuts ​ 200g​

Almonds ​200g​

Pecan​ 200g​

Sunflower Seeds​ ​200g​

Butter cookies ​140g​

To use:

Remove the adaptor ring and mechanism/cover at once from the base by firmly holding the base and unscrewing the adaptor ring bayonet in a counterclockwise direction until it is unlocked. Make sure the blade insert is inside the base before adding ingredients, and place the ingredients into the base equally on each side of the blade insert.

The Extra Chopper can be filled to the measurements found all around the base of 800 ml/27oz.

Never exceed this line to allow the SuperSonic Chopper Extra to perform at its best. Place the adaptor ring and mechanism/cover back on the base by screwing the bayonet of the adaptor ring clockwise until you feel it lock onto the base.

Always use the SuperSonic Chopper on a countertop or dry, stable surface.  

To chop, hold it firmly by placing one hand on it, and pull the cord in fast, straight movements with the other hand. Start directly to pull in fast movements so that the mechanism does not get stuck. The more times you pull the cord, the finer the results will be.

For best results when chopping dry ingredients, pull cord 3-4 times and then shake the Chopper, using both hands, before continuing, so that the ingredients that have stuck to the walls come back in the center.Afterwards, put the Chopper back on the countertop and continue to pull until the ingredients have been chopped to the desired size. We recommend checking results after every other pull as you get used to using your Chopper. You'll soon learn how many pulls you need in order to reach your desired result–coarse or fine.

If your recipe includes both dry (herbs, garlic, shallots, etc.) and liquid ingredients, chop the dry ingredients first, then add liquids and continue blending if needed.

The Funnel features an "easy-dosing system" that allows you to measure and add liquids during preparation without opening the cover. Open the soft cap in the Adaptor Ring and turn it on the side. Place the funnel in the recess opening. Make sure that the pull cord faces away from the funnel. Move the funnel to the closed position for measuring and the open position for pouring while mixing. Once you are done, remove the adaptor ring and mechanism/cover at once by using one hand to hold down the base and the other hand to unscrew the bayonet of the adaptor ring counterclockwise and lift up the cover vertically. Remove the blade insert by holding it by the larger part at the top. Scoop the contents out of the base using the Silicone Spatula.

If you want to mix without chopping, then use the paddle insert instead.

To disassemble:

The SuperSonic Chopper Extra can be disassembled into five parts: the base, anti-skid ring, blade insert or paddle insert, the adaptor ring , top cover and the bottom cover.

Remove the mechanism/cover from the adaptor ring by firmly holding the base and adaptor ring with one hand while unscrewing the mechanism/cover bayonet in a counterclockwise direction until it is unlocked.

Lift the upper cover.

Remove the adaptor ring by firmly holding the product base while unscrewing the adaptor ring bayonet in a counterclockwise direction until it is unlocked. Lift the adaptor ring up.

Hold the mechanism/cover with both hands one on the top cover and the other on the bottom cover and push the red button with your thumb. At the same time, twist the upper and bottom covers in opposite directions. The red button should follow the direction of the arrow to the unlock pictogram.

To assemble:

Align the red button of the top cover with the beginning of the arrow pictogram marked in the inner part of the bottom cover. You know it’s in place once you don’t see the button anymore and there is no gap between both covers.

Twist the covers in opposite directions until you see the red button.

Then, first place mechanism/cover on the adaptor ring by screwing the bayonet counterclockwise while holding the ring firmly. Then hold Chopper base firmly and screw the ring in a clockwise direction until it locks into place.

Care: 

Warning: Blades are extremely sharp, always take extra caution when manipulating or cleaning them.

Keep the SuperSonic Chopper out of reach of children.

The SuperSonic Chopper Extra is ideal for use with soft and semi-soft ingredients where the high speed is necessary to cut properly. 

Do not use hard ingredients such as coffee beans, sugar cubes, sea salt, cloves and star anise in the Chopper as they will get stuck in the blades and damage the base.

You do NOT need to pull the cord all the way out to get a good chopping result. Over pulling will damage the mechanism over time.

To remove food from the base of the Chopper, always use a non-metallic utensil, such as the KPT Silicone Spatula. Metallic utensils will damage the base.

Do not use Silicone Spatulas on the blades as blades will damage the spatulas. Use the back side of a knife to scrape food off blades.

To clean thoroughly,  disassemble the cover as explained before.

The following components are dishwasher safe:

Base

Bottom part of the cover

Paddle insert

Funnel

The following components must be hand washed:

Blades insert –To keep blades sharp, wash separately under running water, using a brush, after every use.

Anti-skid ring

Top of cover–Clean by hand with a wet cloth after every use.

To clean the cord, pull it completely out of the top cover and place it under running water while making pulling movements. Dry afterward using Microfiber Dish Drying Towel.

It is recommended that you rinse the your Chopper immediately after each use to guarantee optimal performance when chopping. It will also facilitate cleaning and avoid possible odor formation and staining.

Don’t keep ingredients like ginger and citrus in the base for more than one day as they could damage the material.

If there are still odors left after washing—e.g., onion or garlic—soak the base for one hour in a solution of 1 tablespoon dishwashing powder and 1L warm water and then rinse.

Before putting the cover on the base, always make sure the rim of the base is perfectly clean to prevent food from gluing together the base and the cover.

Do not screw or unscrew the top cover's mechanism, as that can damage it.

Do not overflow with oil and take care to always wait few seconds before removing and putting the cover upside down so that oil does not going into the cover.

Staining may occur, but this will not affect the performance of the SuperSonic Chopper.

Never carry the SuperSonic Chopper by the cord.

To store, always put blade protector on and position the blade insert in the center of container, over pin. Place funnel inside container. Place paddle whisk inside container with whisk "head" facing upward. Place adaptor ring on Chopper. Add pull-cord cover.